Stackable baskets
por vivamus3d
Ficheiros imprimíveis (42)
-
stlStackableBasket-30x10.stl
593 Ko · 1 511 descargas
-
stlStackableBasket-29x10.stl
583 Ko · 1 269 descargas
-
stl
StackableBasket-28x10.stl
563 Ko · 1 314 descargas
-
stl
StackableBasket-27x10.stl
542 Ko · 1 294 descargas
-
stl
StackableBasket-26x10.stl
526 Ko · 1 305 descargas
-
stl
StackableBasket-25x10.stl
511 Ko · 1 486 descargas
-
stl
StackableBasket-24x10.stl
499 Ko · 1 341 descargas
-
stl
StackableBasket-23x10.stl
473 Ko · 1 322 descargas
-
stl
StackableBasket-22x10.stl
458 Ko · 1 381 descargas
-
stl
StackableBasket-21x10.stl
443 Ko · 1 319 descargas
-
stl
StackableBasket-20x10.stl
431 Ko · 1 597 descargas
-
stl
StackableBasket-19x10.stl
405 Ko · 1 336 descargas
-
stl
StackableBasket-18x10.stl
389 Ko · 1 351 descargas
-
stl
StackableBasket-17x10.stl
374 Ko · 1 308 descargas
-
stlStackableBasket-16x10.stl
358 Ko · 1 278 descargas
-
stl
StackableBasket-15x10.stl
336 Ko · 1 442 descargas
-
stl
StackableBasket-14x10.stl
323 Ko · 1 317 descargas
-
stl
StackableBasket-13x10.stl
309 Ko · 1 302 descargas
-
stl
StackableBasket-12x10.stl
291 Ko · 1 326 descargas
-
stl
StackableBasket-11x10.stl
271 Ko · 1 305 descargas
-
stl
StackableBasket-10x10.stl
253 Ko · 1 463 descargas
-
stl
V1b-StackBasket-30x10.stl
694 Ko · 806 descargas
-
stlV1b-StackBasket-29x10.stl
685 Ko · 765 descargas
-
stl
V1b-StackBasket-28x10.stl
665 Ko · 772 descargas
-
stlV1b-StackBasket-27x10.stl
634 Ko · 763 descargas
-
stlV1b-StackBasket-26x10.stl
621 Ko · 757 descargas
-
stl
V1b-StackBasket-25x10.stl
606 Ko · 803 descargas
-
stlV1b-StackBasket-24x10.stl
595 Ko · 773 descargas
-
stlV1b-StackBasket-23x10.stl
558 Ko · 769 descargas
-
stlV1b-StackBasket-22x10.stl
541 Ko · 776 descargas
-
stlV1b-StackBasket-21x10.stl
533 Ko · 762 descargas
-
stlV1b-StackBasket-20x10.stl
515 Ko · 809 descargas
-
stlV1b-StackBasket-19x10.stl
486 Ko · 764 descargas
-
stlV1b-StackBasket-180x10.stl
468 Ko · 774 descargas
-
stlV1b-StackBasket-17x10.stl
455 Ko · 760 descargas
-
stlV1b-StackBasket-16x10.stl
440 Ko · 770 descargas
-
stlV1b-StackBasket-15x10.stl
407 Ko · 791 descargas
-
stlV1b-StackBasket-14x10.stl
392 Ko · 764 descargas
-
stlV1b-StackBasket-13x10.stl
381 Ko · 761 descargas
-
stlV1b-StackBasket-12x10.stl
365 Ko · 782 descargas
-
stlV1b-StackBasket-11x10.stl
332 Ko · 758 descargas
-
stlV1b-StackBasket-10x10.stl
315 Ko · 810 descargas
Descrição
Update-2022-03-04: After the surprising success of version 2 of these baskets (full baskets, all sides with honeycombs), I decided to create a compromise between the two and called it "version 1b". The main difference to v1 is the angled front, which now has honeycombs (like v2), but I kept the closed bottom, so that nothing can fall through. And with the right Slicer settings they do not even need more filament than version 2. (see below)
Yet another set of stackable containers. You can find several different sets of stackable boxes on thingiverse, but many of them are for very small things only or use quite a bit of filament, so the DIY variant isn't much cheaper than buying some boxes.
Therefore I was looking for a compromise between size, stackability and minimal use of filament - stackable baskets of reasonable size. The largest one (30cm x 10cm) need only 100g of filament and of course no support. An due to the honeycomb structure and some stiffeners they are still stable enough.
I decided for 10cm wide and 7.5cm high boxes with different length, up to 30cm, which would just fit straight on a 30x30 cm print bed*). All sizes are stackable on each other. You can also stick a paper label to the front.
Remark: I have also created a remix with "full baskets", i.e. honeycombs also on bottom: thing:5156678