Small and stack miniITX Case
von Ren_Dev
Druckbare Dateien (16)
-
stlbutton_mount.stl
51 Ko · 521 Downloads
-
stlbutton.stl
115 Ko · 520 Downloads
-
stlPAD.stl
4 Ko · 514 Downloads
-
stlstack_pad.stl
7 Ko · 513 Downloads
-
stlMB_panel.stl
273 Ko · 520 Downloads
-
stlbutton_clear.stl
60 Ko · 514 Downloads
-
stlMB_panel.stl
292 Ko · 508 Downloads
-
stlBase_V2.stl
1.1 Mo · 455 Downloads
-
stlSLIM_BASE.stl
1.1 Mo · 488 Downloads
-
stlBase_Case.stl
1.1 Mo · 462 Downloads
-
stlcase_stack_panel_no_border.stl
113 Ko · 447 Downloads
-
stlUP_case_V2.stl
214 Ko · 475 Downloads
-
stlcase_stack_panel.stl
267 Ko · 440 Downloads
-
stlUP_case_V2_2.5_mount.stl
260 Ko · 455 Downloads
-
stlDOWN_case.stl
210 Ko · 453 Downloads
-
stlUP_case.stl
216 Ko · 444 Downloads
Beschreibung
Easy print miniITX Case, CPU cooler support high up to 41mm at CPU and 2x2.5" HDD/SSD.
No need sanding!
Case only for small picoATX adapter with external PSU!
Case assemble size without pad 190x190x75mm, you can be easy print at standart 200x200mm bed printer.
Power button model for 6x6x6 mm tact switches.
You can be stack this case with soft pad(stack_pad) or hard panel(case_stack_panel_no_border & case_stack panel).
For assemble need standart PC screw:
UNC 6-32 x 10 for case x4 for MB.
M3 screw for 2.5HDD/SSD.
I am print case:
MB_panel - ABS
PAD - TPU
Others - PLA
Support need only for: "Base_Case" "button"
For assemble need:"Base_Case" + "UP_case" + "DOWN_case" + "MB_panel" + "button" + "button_mount" + "PAD".
Assemble:
- install "button" with "button_mount" to "Base_Case"
- install back IO panel and "UP_case" to "Base_Case"
- install SSD/HDD and Motheboard to "MB_panel"
- install "MB_panel" to "Base_Case"
- install "DOWN_case" to "Base_Case"
- install 4x"PAD" to "Base_Case" or "DOWN_case"
UPD1: Add V2 symmetric up/down mount.
For assemble need: "Base_V2" + "UP_case_V2"(or "UP_case_V2_2.5_mount") + "DOWN_case" + "MB_panel" + "button" + "button_mount" + "PAD".
And support only soft stack_pad.
UPD2: Add V2 SLIM 190x190x60mm for use M.2 SSD or one 2.5" HDD with "UP_case_V2_2.5_mount".
For assemble need:"SLIM_BASE" + "UP_case_V2"(or "UP_case_V2_2.5_mount") + "button" + "button_mount" + "PAD".
And support only soft stack_pad.
UPD: Fix screw hole size.