Small and stack miniITX Case

por Ren_Dev

Ficheiros imprimíveis (16)

  • stl

    button_mount.stl

    51 Ko · 521 descargas

    Descarregar
  • stl

    button.stl

    115 Ko · 520 descargas

    Descarregar
  • stl

    PAD.stl

    4 Ko · 514 descargas

    Descarregar
  • stl

    stack_pad.stl

    7 Ko · 513 descargas

    Descarregar
  • stl

    MB_panel.stl

    273 Ko · 520 descargas

    Descarregar
  • stl

    button_clear.stl

    60 Ko · 514 descargas

    Descarregar
  • stl

    MB_panel.stl

    292 Ko · 508 descargas

    Descarregar
  • stl

    Base_V2.stl

    1.1 Mo · 455 descargas

    Descarregar
  • stl

    SLIM_BASE.stl

    1.1 Mo · 488 descargas

    Descarregar
  • stl

    Base_Case.stl

    1.1 Mo · 462 descargas

    Descarregar
  • stl

    case_stack_panel_no_border.stl

    113 Ko · 447 descargas

    Descarregar
  • stl

    UP_case_V2.stl

    214 Ko · 475 descargas

    Descarregar
  • stl

    case_stack_panel.stl

    267 Ko · 440 descargas

    Descarregar
  • stl

    UP_case_V2_2.5_mount.stl

    260 Ko · 455 descargas

    Descarregar
  • stl

    DOWN_case.stl

    210 Ko · 453 descargas

    Descarregar
  • stl

    UP_case.stl

    216 Ko · 444 descargas

    Descarregar

Descrição

Easy print miniITX Case, CPU cooler support high up to 41mm at CPU and 2x2.5" HDD/SSD.

No need sanding!

Case only for small picoATX adapter with external PSU!

Case assemble size without pad 190x190x75mm, you can be easy print at standart 200x200mm bed printer.

Power button model for 6x6x6 mm tact switches.

You can be stack this case with soft pad(stack_pad) or hard panel(case_stack_panel_no_border & case_stack panel).

For assemble need standart PC screw:
UNC 6-32 x 10 for case x4 for MB.
M3 screw for 2.5HDD/SSD.

I am print case:
MB_panel - ABS
PAD - TPU
Others - PLA

Support need only for: "Base_Case" "button"

For assemble need:"Base_Case" + "UP_case" + "DOWN_case" + "MB_panel" + "button" + "button_mount" + "PAD".

Assemble:

  1. install "button" with "button_mount" to "Base_Case"
  2. install back IO panel and "UP_case" to "Base_Case"
  3. install SSD/HDD and Motheboard to "MB_panel"
  4. install "MB_panel" to "Base_Case"
  5. install "DOWN_case" to "Base_Case"
  6. install 4x"PAD" to "Base_Case" or "DOWN_case"

UPD1: Add V2 symmetric up/down mount.
For assemble need: "Base_V2" + "UP_case_V2"(or "UP_case_V2_2.5_mount") + "DOWN_case" + "MB_panel" + "button" + "button_mount" + "PAD".
And support only soft stack_pad.

UPD2: Add V2 SLIM 190x190x60mm for use M.2 SSD or one 2.5" HDD with "UP_case_V2_2.5_mount".
For assemble need:"SLIM_BASE" + "UP_case_V2"(or "UP_case_V2_2.5_mount") + "button" + "button_mount" + "PAD".
And support only soft stack_pad.

UPD: Fix screw hole size.

https://youtu.be/k5V4Pwolyjw

Etiquetas

#case #ITX #mini-itx