RepRap Wallace
door whosawhatsis
Printbare bestanden (17)
-
stlbase.stl
164 Ko · 10 544 downloads
-
stlbed_mounts.stl
147 Ko · 10 099 downloads
-
stlidler_double-bearing.stl
498 Ko · 10 136 downloads
-
stlidler_single-bearing.stl
473 Ko · 10 054 downloads
-
stlleadscrew_couplers.stl
92 Ko · 10 078 downloads
-
stlMXL_pulleys.stl
510 Ko · 10 279 downloads
-
stlx_carriage.stl
226 Ko · 10 059 downloads
-
stly_bearing_retainers.stl
365 Ko · 10 026 downloads
-
stly_idler.stl
48 Ko · 10 088 downloads
-
stlfeet.stl
169 Ko · 9 951 downloads
-
stlx_end_left.stl
216 Ko · 10 006 downloads
-
stlx_end_right.stl
304 Ko · 10 013 downloads
-
stlz_top_clamps.stl
62 Ko · 9 975 downloads
-
stl200mm_plate.stl
2.3 Mo · 11 941 downloads
-
stl100mm_plate_1.stl
260 Ko · 10 004 downloads
-
stl100mm_plate_2.stl
283 Ko · 9 888 downloads
-
stl100mm_plate_3.stl
166 Ko · 9 967 downloads
Beschrijving
This is a parametric Reprap printer based loosely on the Printrbot design. It is designed for NEMA14 motors, 6mm rods, and LM6UU bearings, though the hardware can be changed by modifying the parameters in the scad file.
The Reprap Wallace is now on github: https://github.com/whosawhatsis/RepRap-Wallace
There is a video of an axis test using Marlin on youtube: http://www.youtube.com/watch?v=0QrEmGlZT0w&context=C3f40eeaADOEgsToPDskJ7qwV6fvNjtb93Wcpz_SHy
More documentation, pics, and video on the Reprap Wiki page: http://reprap.org/wiki/Wallace