RepRap Wallace
por whosawhatsis
Ficheiros imprimíveis (17)
-
stlbase.stl
164 Ko · 10 544 descargas
-
stlbed_mounts.stl
147 Ko · 10 099 descargas
-
stlidler_double-bearing.stl
498 Ko · 10 136 descargas
-
stlidler_single-bearing.stl
473 Ko · 10 054 descargas
-
stlleadscrew_couplers.stl
92 Ko · 10 078 descargas
-
stlMXL_pulleys.stl
510 Ko · 10 279 descargas
-
stlx_carriage.stl
226 Ko · 10 059 descargas
-
stly_bearing_retainers.stl
365 Ko · 10 026 descargas
-
stly_idler.stl
48 Ko · 10 088 descargas
-
stlfeet.stl
169 Ko · 9 951 descargas
-
stlx_end_left.stl
216 Ko · 10 006 descargas
-
stlx_end_right.stl
304 Ko · 10 013 descargas
-
stlz_top_clamps.stl
62 Ko · 9 975 descargas
-
stl200mm_plate.stl
2.3 Mo · 11 941 descargas
-
stl100mm_plate_1.stl
260 Ko · 10 004 descargas
-
stl100mm_plate_2.stl
283 Ko · 9 888 descargas
-
stl100mm_plate_3.stl
166 Ko · 9 967 descargas
Descrição
This is a parametric Reprap printer based loosely on the Printrbot design. It is designed for NEMA14 motors, 6mm rods, and LM6UU bearings, though the hardware can be changed by modifying the parameters in the scad file.
The Reprap Wallace is now on github: https://github.com/whosawhatsis/RepRap-Wallace
There is a video of an axis test using Marlin on youtube: http://www.youtube.com/watch?v=0QrEmGlZT0w&context=C3f40eeaADOEgsToPDskJ7qwV6fvNjtb93Wcpz_SHy
More documentation, pics, and video on the Reprap Wiki page: http://reprap.org/wiki/Wallace