RepRap Wallace

por whosawhatsis

Archivos imprimibles (17)

  • stl

    base.stl

    164 Ko · 10 544 descargas

    Descargar
  • stl

    bed_mounts.stl

    147 Ko · 10 099 descargas

    Descargar
  • stl

    idler_double-bearing.stl

    498 Ko · 10 136 descargas

    Descargar
  • stl

    idler_single-bearing.stl

    473 Ko · 10 054 descargas

    Descargar
  • stl

    leadscrew_couplers.stl

    92 Ko · 10 078 descargas

    Descargar
  • stl

    MXL_pulleys.stl

    510 Ko · 10 279 descargas

    Descargar
  • stl

    x_carriage.stl

    226 Ko · 10 059 descargas

    Descargar
  • stl

    y_bearing_retainers.stl

    365 Ko · 10 026 descargas

    Descargar
  • stl

    y_idler.stl

    48 Ko · 10 088 descargas

    Descargar
  • stl

    feet.stl

    169 Ko · 9 951 descargas

    Descargar
  • stl

    x_end_left.stl

    216 Ko · 10 006 descargas

    Descargar
  • stl

    x_end_right.stl

    304 Ko · 10 013 descargas

    Descargar
  • stl

    z_top_clamps.stl

    62 Ko · 9 975 descargas

    Descargar
  • stl

    200mm_plate.stl

    2.3 Mo · 11 941 descargas

    Descargar
  • stl

    100mm_plate_1.stl

    260 Ko · 10 004 descargas

    Descargar
  • stl

    100mm_plate_2.stl

    283 Ko · 9 888 descargas

    Descargar
  • stl

    100mm_plate_3.stl

    166 Ko · 9 967 descargas

    Descargar

Descripción

This is a parametric Reprap printer based loosely on the Printrbot design. It is designed for NEMA14 motors, 6mm rods, and LM6UU bearings, though the hardware can be changed by modifying the parameters in the scad file.

The Reprap Wallace is now on github: https://github.com/whosawhatsis/RepRap-Wallace

There is a video of an axis test using Marlin on youtube: http://www.youtube.com/watch?v=0QrEmGlZT0w&context=C3f40eeaADOEgsToPDskJ7qwV6fvNjtb93Wcpz_SHy

More documentation, pics, and video on the Reprap Wiki page: http://reprap.org/wiki/Wallace

Etiquetas

#3d printer #GT2 #lm6uu #lm8uu #MXL #openscad #parametric #printer #printerbot #printrbot #reprap #vertical-x-axis #wallace