Raspberry pi zero case
door I_am_me
Printbare bestanden (8)
-
stlTop_rpi0_v1.2.stl
251 Ko · 13 034 downloads
-
stlBottom_rpi0_v1.2.stl
136 Ko · 12 966 downloads
-
stlBottom_rpi0_v1.3.stl
137 Ko · 13 275 downloads
-
stlTop_rpi0_v1.3.stl
252 Ko · 13 198 downloads
-
stl0.4_top_rpi0_v1.3.stl
245 Ko · 13 128 downloads
-
stl0.4_bottom_rpi0_v1.3.stl
141 Ko · 13 107 downloads
-
stl0.4_bottom_rpi0_v1.2.stl
141 Ko · 12 799 downloads
-
stl0.4_top_rpi0_v1.2.stl
244 Ko · 12 805 downloads
Beschrijving
This is a simple case for the Raspberry Pi Zero. This two piece design features standoffs so you can solder on whatever you want, access to all GPIOs and cutouts for all ports of the pi (micro USB, mini HDMI and micro SD).
There are two versions :
- The v1.2, for the raspberry pi zero without the camera port.
- The v1.3, for the raspberry pi zero with the camera port.
The 0.4 versions have a 0.4mm tolerance, others have a 0.8mm tolerance to accommodate printers that have a harder time printing the 0.4mm parts.
If you have ideas for improvements feel free to leave a comment.