Raspberry pi zero case
di I_am_me
File stampabili (8)
-
stlTop_rpi0_v1.2.stl
251 Ko · 13 034 download
-
stlBottom_rpi0_v1.2.stl
136 Ko · 12 966 download
-
stlBottom_rpi0_v1.3.stl
137 Ko · 13 275 download
-
stlTop_rpi0_v1.3.stl
252 Ko · 13 198 download
-
stl0.4_top_rpi0_v1.3.stl
245 Ko · 13 128 download
-
stl0.4_bottom_rpi0_v1.3.stl
141 Ko · 13 107 download
-
stl0.4_bottom_rpi0_v1.2.stl
141 Ko · 12 799 download
-
stl0.4_top_rpi0_v1.2.stl
244 Ko · 12 805 download
Descrizione
This is a simple case for the Raspberry Pi Zero. This two piece design features standoffs so you can solder on whatever you want, access to all GPIOs and cutouts for all ports of the pi (micro USB, mini HDMI and micro SD).
There are two versions :
- The v1.2, for the raspberry pi zero without the camera port.
- The v1.3, for the raspberry pi zero with the camera port.
The 0.4 versions have a 0.4mm tolerance, others have a 0.8mm tolerance to accommodate printers that have a harder time printing the 0.4mm parts.
If you have ideas for improvements feel free to leave a comment.