Raspberry pi zero case
por I_am_me
Archivos imprimibles (8)
-
stlTop_rpi0_v1.2.stl
251 Ko · 13 076 descargas
-
stlBottom_rpi0_v1.2.stl
136 Ko · 13 008 descargas
-
stlBottom_rpi0_v1.3.stl
137 Ko · 13 325 descargas
-
stlTop_rpi0_v1.3.stl
252 Ko · 13 242 descargas
-
stl0.4_top_rpi0_v1.3.stl
245 Ko · 13 181 descargas
-
stl0.4_bottom_rpi0_v1.3.stl
141 Ko · 13 156 descargas
-
stl0.4_bottom_rpi0_v1.2.stl
141 Ko · 12 842 descargas
-
stl0.4_top_rpi0_v1.2.stl
244 Ko · 12 848 descargas
Descripción
This is a simple case for the Raspberry Pi Zero. This two piece design features standoffs so you can solder on whatever you want, access to all GPIOs and cutouts for all ports of the pi (micro USB, mini HDMI and micro SD).
There are two versions :
- The v1.2, for the raspberry pi zero without the camera port.
- The v1.3, for the raspberry pi zero with the camera port.
The 0.4 versions have a 0.4mm tolerance, others have a 0.8mm tolerance to accommodate printers that have a harder time printing the 0.4mm parts.
If you have ideas for improvements feel free to leave a comment.