Latching Network Cable Organizer selection
von gdoniu93
Druckbare Dateien (12)
-
stl5x_-_5x_1-2.stl
38 Ko · 724 Downloads
-
stl2x_-_2x_2-2.stl
41 Ko · 695 Downloads
-
stl2x_-_2x_1-2.stl
38 Ko · 691 Downloads
-
stl3x_-_3x_1-2.stl
38 Ko · 704 Downloads
-
stl4x_-_4x_2-2.stl
49 Ko · 743 Downloads
-
stl7x_-_7x_2-2.stl
61 Ko · 744 Downloads
-
stl3x_-_3x_2-2.stl
45 Ko · 706 Downloads
-
stl4x_-_4x_1-2.stl
38 Ko · 741 Downloads
-
stl6x_-_6x_2-2.stl
57 Ko · 727 Downloads
-
stl5x_-_5x_2-2.stl
53 Ko · 725 Downloads
-
stl7x_-_7x_1-2.stl
38 Ko · 754 Downloads
-
stl6x_-_6x_1-2.stl
38 Ko · 723 Downloads
Beschreibung
This is network cable organizer which allows you to clamp from 2 up to 7 6.5mm network cables together. Every clamp consists of two parts 1/2 and 2/2. After printing remove supports and connect them together by simply clicking on piece on another as depicted in the picture. Every clamp allows you for easy adding and removing cables by using simple latching solution.
No screws and nuts are required in this project.
Make your network environment nice and clean with this network cable organizer.