Latching Network Cable Organizer selection
di gdoniu93
File stampabili (12)
-
stl5x_-_5x_1-2.stl
38 Ko · 724 download
-
stl2x_-_2x_2-2.stl
41 Ko · 695 download
-
stl2x_-_2x_1-2.stl
38 Ko · 691 download
-
stl3x_-_3x_1-2.stl
38 Ko · 704 download
-
stl4x_-_4x_2-2.stl
49 Ko · 743 download
-
stl7x_-_7x_2-2.stl
61 Ko · 744 download
-
stl3x_-_3x_2-2.stl
45 Ko · 706 download
-
stl4x_-_4x_1-2.stl
38 Ko · 741 download
-
stl6x_-_6x_2-2.stl
57 Ko · 727 download
-
stl5x_-_5x_2-2.stl
53 Ko · 725 download
-
stl7x_-_7x_1-2.stl
38 Ko · 754 download
-
stl6x_-_6x_1-2.stl
38 Ko · 723 download
Descrizione
This is network cable organizer which allows you to clamp from 2 up to 7 6.5mm network cables together. Every clamp consists of two parts 1/2 and 2/2. After printing remove supports and connect them together by simply clicking on piece on another as depicted in the picture. Every clamp allows you for easy adding and removing cables by using simple latching solution.
No screws and nuts are required in this project.
Make your network environment nice and clean with this network cable organizer.