Latching Network Cable Organizer selection
por gdoniu93
Ficheiros imprimíveis (12)
-
stl5x_-_5x_1-2.stl
38 Ko · 724 descargas
-
stl2x_-_2x_2-2.stl
41 Ko · 695 descargas
-
stl2x_-_2x_1-2.stl
38 Ko · 691 descargas
-
stl3x_-_3x_1-2.stl
38 Ko · 704 descargas
-
stl4x_-_4x_2-2.stl
49 Ko · 743 descargas
-
stl7x_-_7x_2-2.stl
61 Ko · 744 descargas
-
stl3x_-_3x_2-2.stl
45 Ko · 706 descargas
-
stl4x_-_4x_1-2.stl
38 Ko · 741 descargas
-
stl6x_-_6x_2-2.stl
57 Ko · 727 descargas
-
stl5x_-_5x_2-2.stl
53 Ko · 725 descargas
-
stl7x_-_7x_1-2.stl
38 Ko · 754 descargas
-
stl6x_-_6x_1-2.stl
38 Ko · 723 descargas
Descrição
This is network cable organizer which allows you to clamp from 2 up to 7 6.5mm network cables together. Every clamp consists of two parts 1/2 and 2/2. After printing remove supports and connect them together by simply clicking on piece on another as depicted in the picture. Every clamp allows you for easy adding and removing cables by using simple latching solution.
No screws and nuts are required in this project.
Make your network environment nice and clean with this network cable organizer.