Hypercube Evolution 2020
by martind_n
Printable files (45)
-
stlMKS_Sbase_1.3_Mount_v3.stl
59 Ko · 27 643 downloads
-
stlZ_Rail_Bracket_Top_Right_8mm.stl
128 Ko · 28 238 downloads
-
stlZ_Rail_Bracket_Bottom_Left_8mm.stl
86 Ko · 28 204 downloads
-
stlZ_Rail_Bracket_Bottom_Right_8mm.stl
85 Ko · 28 223 downloads
-
stlZ_Rail_Bracket_Top_Left_8mm.stl
127 Ko · 28 152 downloads
-
stlZ_Motor_Mount.stl
81 Ko · 28 329 downloads
-
stlZ_Linear_Rail_Holder_Bottom_Right.stl
87 Ko · 28 259 downloads
-
stlZ_Linear_Rail_Holder_Top_Right.stl
129 Ko · 28 203 downloads
-
stlXY_Idler_Left.stl
150 Ko · 28 281 downloads
-
stlXY_Motor_Right.stl
233 Ko · 28 320 downloads
-
stlZ_Linear_Rail_Holder_Bottom_Left.stl
88 Ko · 28 162 downloads
-
stlZ_Linear_Rail_Holder_Top_Left.stl
129 Ko · 28 125 downloads
-
stlXY_Idler_Right_v7.stl
150 Ko · 28 188 downloads
-
stlXY_Motor_Left.stl
229 Ko · 28 198 downloads
-
stlXY_Idler_Right_LM10.stl
145 Ko · 28 003 downloads
-
stlY_EndStop_Bracket.stl
73 Ko · 28 020 downloads
-
stlXY_Idler_Left_LM10.stl
144 Ko · 27 953 downloads
-
stlExtruder_Mount_2_Opt.stl
195 Ko · 28 029 downloads
-
stlXY_Motor_Left_10mm.stl
233 Ko · 27 925 downloads
-
stlXY_Motor_Right_10mm.stl
237 Ko · 27 880 downloads
-
stlZ_Axis_Bearing_Holder_LM8uu.stl
139 Ko · 27 883 downloads
-
stlPS_Mount_Inner_Right_v3.stl
40 Ko · 27 738 downloads
-
stl24v_PS_Upper_Bracket_v2.stl
33 Ko · 27 724 downloads
-
stl5V_Buck_Mount_v1.stl
275 Ko · 27 741 downloads
-
stlBed_Relay_Bracket_v5.stl
874 Ko · 27 683 downloads
-
stlBuck_Bracket_v4.stl
871 Ko · 27 675 downloads
-
stlExtruder_Motor_Mount_v2.stl
64 Ko · 27 688 downloads
-
stlFilament_Sensor_v8.stl
95 Ko · 27 708 downloads
-
stlFilament_Sensor_Cap_v2.stl
39 Ko · 27 704 downloads
-
stlFront_MKS_TFT32_v7.stl
460 Ko · 27 652 downloads
-
stlBack_MKS_TFT32_v10.stl
294 Ko · 27 638 downloads
-
stlTFT_Bracket_Right_v5.stl
48 Ko · 27 621 downloads
-
stlTFT_Bracket_Left_v5.stl
49 Ko · 27 635 downloads
-
stlRAMPS_Bracket_v5.stl
70 Ko · 27 602 downloads
-
stlCilinder.stl
119 Ko · 27 572 downloads
-
stlM8_Nut_Handle.stl
62 Ko · 27 593 downloads
-
stlSpool_Holder.stl
384 Ko · 27 553 downloads
-
stlPTFE_Clamp_2020_Lat_v1.stl
38 Ko · 27 567 downloads
-
stlPTFE_Clamp_2020_2.stl
68 Ko · 27 534 downloads
-
stlExtruder_Mount_2.0_v2.stl
197 Ko · 27 527 downloads
-
stlBLTouch_Mount_v4.stl
148 Ko · 26 975 downloads
-
stlLeft_Motor_2020_10mm_v1_v1.stl
233 Ko · 19 977 downloads
-
stlRight_Motor_2020_10mm_v1_v1.stl
237 Ko · 19 959 downloads
-
stlXY_Idler_Mount_Right_2020_10mm_v1_v1.stl
145 Ko · 19 954 downloads
-
stlXY_Idler_Mount_Left_2020_10mm_v1_v1.stl
144 Ko · 19 934 downloads
Description
Here where I live is almost impossible to get 3030 extrusion, so I come up with this remix in order to build HyperCube Evolution on 2020 extrusion.
The missing parts shall remain the same as the ones posted by Scott.
Design is for 8mm linear rail on both X and Y.
I didn't print it yet since I'm still waiting my extrusions to arrive, so if you find any error, please let me know.
UPDATES
05-Sep: Finally all the parts have been printed and fits smoothly on 2020 profile. Original desing by Scott for Z nut holder fits fine also.
18-Sep: Idlers for 10mm rod. Modified Y endstop bracket to fit better with endstop flag. New Extruder mount to fit both min and max opto endstop. Files for 8mm Z rods.
13-Dec: Well, after a long time I finished the printer a coule of weeks ago. New pictures are available in order to check the whole remix from the original HEVO.
I added a TFT32 controller + MKS WiFi module. Also, in the same enclosure I added a couple o LED to indicate when either E0 or the Heatedbed are working. All the desings for the parts I'm using are available for download.
Also I attached two led stripes that can be turned on from MKSTFT32 and a runout filament sensor to help avoiding run out of filament during long printings.
It's fair to mention I remixed the spool holder from @bliatun (https://www.thingiverse.com/thing:2084843) and @rowokii (https://www.thingiverse.com/thing:767317).
19-Jan: Redesigned Extruder Mount. The problem I found with the original version is that the brass knurled inserts are not attached strongly enough to the plastic, so once you start tigthening the bolts, the inserts start poping out. In this new design, the inserts were placed at the back of the piece, so you can tight the screws as much as you want with out any issue.
3-May: The mods continue... Added new electronics, MKS Sbase 1.3 with its mount bracket (available for downloading). My Hevo2020 has a new Drakon Extruder by @AxMod3DPrint (https://www.thingiverse.com/thing:2172854) this was needed to get a smoother flow on the filament, without it, the extruder motor was skipping some steps, so I decided to add a geared extruder to avoid so... Also added cable chain for X and Y axles (still pending in Z). Cable chain desing by @lamturbo (https://www.thingiverse.com/thing:2823973). Also the mods for dual extrusion have began, keep you posted!
31-May: Dual extrusion! After a lot of tweaking (fighting) against SW and HW, I could finally get my HEVO 2020 Multimaterial. I added a TL-Feeder and after a lot of testing and filament wasting it now works like a charm. Also, I also added a new filament sensor that fits Drakon Extruders.
26-Jun: Tired of fighting with capacitive sensor for Z-Probe, decided to change it for mostly flawless TLTouch (BLTouch clone). Mount for this piece just fits the place for inductive sensor without needing to change any part already printed.
That's all folks...(?)