Hypercube Evolution 2020
por martind_n
Ficheiros imprimíveis (45)
-
stlMKS_Sbase_1.3_Mount_v3.stl
59 Ko · 27 643 descargas
-
stlZ_Rail_Bracket_Top_Right_8mm.stl
128 Ko · 28 238 descargas
-
stlZ_Rail_Bracket_Bottom_Left_8mm.stl
86 Ko · 28 204 descargas
-
stlZ_Rail_Bracket_Bottom_Right_8mm.stl
85 Ko · 28 223 descargas
-
stlZ_Rail_Bracket_Top_Left_8mm.stl
127 Ko · 28 152 descargas
-
stlZ_Motor_Mount.stl
81 Ko · 28 329 descargas
-
stlZ_Linear_Rail_Holder_Bottom_Right.stl
87 Ko · 28 259 descargas
-
stlZ_Linear_Rail_Holder_Top_Right.stl
129 Ko · 28 203 descargas
-
stlXY_Idler_Left.stl
150 Ko · 28 281 descargas
-
stlXY_Motor_Right.stl
233 Ko · 28 320 descargas
-
stlZ_Linear_Rail_Holder_Bottom_Left.stl
88 Ko · 28 162 descargas
-
stlZ_Linear_Rail_Holder_Top_Left.stl
129 Ko · 28 125 descargas
-
stlXY_Idler_Right_v7.stl
150 Ko · 28 188 descargas
-
stlXY_Motor_Left.stl
229 Ko · 28 198 descargas
-
stlXY_Idler_Right_LM10.stl
145 Ko · 28 003 descargas
-
stlY_EndStop_Bracket.stl
73 Ko · 28 020 descargas
-
stlXY_Idler_Left_LM10.stl
144 Ko · 27 953 descargas
-
stlExtruder_Mount_2_Opt.stl
195 Ko · 28 029 descargas
-
stlXY_Motor_Left_10mm.stl
233 Ko · 27 925 descargas
-
stlXY_Motor_Right_10mm.stl
237 Ko · 27 880 descargas
-
stlZ_Axis_Bearing_Holder_LM8uu.stl
139 Ko · 27 883 descargas
-
stlPS_Mount_Inner_Right_v3.stl
40 Ko · 27 738 descargas
-
stl24v_PS_Upper_Bracket_v2.stl
33 Ko · 27 724 descargas
-
stl5V_Buck_Mount_v1.stl
275 Ko · 27 741 descargas
-
stlBed_Relay_Bracket_v5.stl
874 Ko · 27 683 descargas
-
stlBuck_Bracket_v4.stl
871 Ko · 27 675 descargas
-
stlExtruder_Motor_Mount_v2.stl
64 Ko · 27 688 descargas
-
stlFilament_Sensor_v8.stl
95 Ko · 27 708 descargas
-
stlFilament_Sensor_Cap_v2.stl
39 Ko · 27 704 descargas
-
stlFront_MKS_TFT32_v7.stl
460 Ko · 27 652 descargas
-
stlBack_MKS_TFT32_v10.stl
294 Ko · 27 638 descargas
-
stlTFT_Bracket_Right_v5.stl
48 Ko · 27 621 descargas
-
stlTFT_Bracket_Left_v5.stl
49 Ko · 27 635 descargas
-
stlRAMPS_Bracket_v5.stl
70 Ko · 27 602 descargas
-
stlCilinder.stl
119 Ko · 27 572 descargas
-
stlM8_Nut_Handle.stl
62 Ko · 27 593 descargas
-
stlSpool_Holder.stl
384 Ko · 27 553 descargas
-
stlPTFE_Clamp_2020_Lat_v1.stl
38 Ko · 27 567 descargas
-
stlPTFE_Clamp_2020_2.stl
68 Ko · 27 534 descargas
-
stlExtruder_Mount_2.0_v2.stl
197 Ko · 27 527 descargas
-
stlBLTouch_Mount_v4.stl
148 Ko · 26 975 descargas
-
stlLeft_Motor_2020_10mm_v1_v1.stl
233 Ko · 19 977 descargas
-
stlRight_Motor_2020_10mm_v1_v1.stl
237 Ko · 19 959 descargas
-
stlXY_Idler_Mount_Right_2020_10mm_v1_v1.stl
145 Ko · 19 954 descargas
-
stlXY_Idler_Mount_Left_2020_10mm_v1_v1.stl
144 Ko · 19 934 descargas
Descrição
Here where I live is almost impossible to get 3030 extrusion, so I come up with this remix in order to build HyperCube Evolution on 2020 extrusion.
The missing parts shall remain the same as the ones posted by Scott.
Design is for 8mm linear rail on both X and Y.
I didn't print it yet since I'm still waiting my extrusions to arrive, so if you find any error, please let me know.
UPDATES
05-Sep: Finally all the parts have been printed and fits smoothly on 2020 profile. Original desing by Scott for Z nut holder fits fine also.
18-Sep: Idlers for 10mm rod. Modified Y endstop bracket to fit better with endstop flag. New Extruder mount to fit both min and max opto endstop. Files for 8mm Z rods.
13-Dec: Well, after a long time I finished the printer a coule of weeks ago. New pictures are available in order to check the whole remix from the original HEVO.
I added a TFT32 controller + MKS WiFi module. Also, in the same enclosure I added a couple o LED to indicate when either E0 or the Heatedbed are working. All the desings for the parts I'm using are available for download.
Also I attached two led stripes that can be turned on from MKSTFT32 and a runout filament sensor to help avoiding run out of filament during long printings.
It's fair to mention I remixed the spool holder from @bliatun (https://www.thingiverse.com/thing:2084843) and @rowokii (https://www.thingiverse.com/thing:767317).
19-Jan: Redesigned Extruder Mount. The problem I found with the original version is that the brass knurled inserts are not attached strongly enough to the plastic, so once you start tigthening the bolts, the inserts start poping out. In this new design, the inserts were placed at the back of the piece, so you can tight the screws as much as you want with out any issue.
3-May: The mods continue... Added new electronics, MKS Sbase 1.3 with its mount bracket (available for downloading). My Hevo2020 has a new Drakon Extruder by @AxMod3DPrint (https://www.thingiverse.com/thing:2172854) this was needed to get a smoother flow on the filament, without it, the extruder motor was skipping some steps, so I decided to add a geared extruder to avoid so... Also added cable chain for X and Y axles (still pending in Z). Cable chain desing by @lamturbo (https://www.thingiverse.com/thing:2823973). Also the mods for dual extrusion have began, keep you posted!
31-May: Dual extrusion! After a lot of tweaking (fighting) against SW and HW, I could finally get my HEVO 2020 Multimaterial. I added a TL-Feeder and after a lot of testing and filament wasting it now works like a charm. Also, I also added a new filament sensor that fits Drakon Extruders.
26-Jun: Tired of fighting with capacitive sensor for Z-Probe, decided to change it for mostly flawless TLTouch (BLTouch clone). Mount for this piece just fits the place for inductive sensor without needing to change any part already printed.
That's all folks...(?)