Hypercube Evolution 2020
di martind_n
File stampabili (45)
-
stlMKS_Sbase_1.3_Mount_v3.stl
59 Ko · 27 643 download
-
stlZ_Rail_Bracket_Top_Right_8mm.stl
128 Ko · 28 238 download
-
stlZ_Rail_Bracket_Bottom_Left_8mm.stl
86 Ko · 28 204 download
-
stlZ_Rail_Bracket_Bottom_Right_8mm.stl
85 Ko · 28 223 download
-
stlZ_Rail_Bracket_Top_Left_8mm.stl
127 Ko · 28 152 download
-
stlZ_Motor_Mount.stl
81 Ko · 28 329 download
-
stlZ_Linear_Rail_Holder_Bottom_Right.stl
87 Ko · 28 259 download
-
stlZ_Linear_Rail_Holder_Top_Right.stl
129 Ko · 28 203 download
-
stlXY_Idler_Left.stl
150 Ko · 28 281 download
-
stlXY_Motor_Right.stl
233 Ko · 28 320 download
-
stlZ_Linear_Rail_Holder_Bottom_Left.stl
88 Ko · 28 162 download
-
stlZ_Linear_Rail_Holder_Top_Left.stl
129 Ko · 28 125 download
-
stlXY_Idler_Right_v7.stl
150 Ko · 28 188 download
-
stlXY_Motor_Left.stl
229 Ko · 28 198 download
-
stlXY_Idler_Right_LM10.stl
145 Ko · 28 003 download
-
stlY_EndStop_Bracket.stl
73 Ko · 28 020 download
-
stlXY_Idler_Left_LM10.stl
144 Ko · 27 953 download
-
stlExtruder_Mount_2_Opt.stl
195 Ko · 28 029 download
-
stlXY_Motor_Left_10mm.stl
233 Ko · 27 925 download
-
stlXY_Motor_Right_10mm.stl
237 Ko · 27 880 download
-
stlZ_Axis_Bearing_Holder_LM8uu.stl
139 Ko · 27 883 download
-
stlPS_Mount_Inner_Right_v3.stl
40 Ko · 27 738 download
-
stl24v_PS_Upper_Bracket_v2.stl
33 Ko · 27 724 download
-
stl5V_Buck_Mount_v1.stl
275 Ko · 27 741 download
-
stlBed_Relay_Bracket_v5.stl
874 Ko · 27 683 download
-
stlBuck_Bracket_v4.stl
871 Ko · 27 675 download
-
stlExtruder_Motor_Mount_v2.stl
64 Ko · 27 688 download
-
stlFilament_Sensor_v8.stl
95 Ko · 27 708 download
-
stlFilament_Sensor_Cap_v2.stl
39 Ko · 27 704 download
-
stlFront_MKS_TFT32_v7.stl
460 Ko · 27 652 download
-
stlBack_MKS_TFT32_v10.stl
294 Ko · 27 638 download
-
stlTFT_Bracket_Right_v5.stl
48 Ko · 27 621 download
-
stlTFT_Bracket_Left_v5.stl
49 Ko · 27 635 download
-
stlRAMPS_Bracket_v5.stl
70 Ko · 27 602 download
-
stlCilinder.stl
119 Ko · 27 572 download
-
stlM8_Nut_Handle.stl
62 Ko · 27 593 download
-
stlSpool_Holder.stl
384 Ko · 27 553 download
-
stlPTFE_Clamp_2020_Lat_v1.stl
38 Ko · 27 567 download
-
stlPTFE_Clamp_2020_2.stl
68 Ko · 27 534 download
-
stlExtruder_Mount_2.0_v2.stl
197 Ko · 27 527 download
-
stlBLTouch_Mount_v4.stl
148 Ko · 26 975 download
-
stlLeft_Motor_2020_10mm_v1_v1.stl
233 Ko · 19 977 download
-
stlRight_Motor_2020_10mm_v1_v1.stl
237 Ko · 19 959 download
-
stlXY_Idler_Mount_Right_2020_10mm_v1_v1.stl
145 Ko · 19 954 download
-
stlXY_Idler_Mount_Left_2020_10mm_v1_v1.stl
144 Ko · 19 934 download
Descrizione
Here where I live is almost impossible to get 3030 extrusion, so I come up with this remix in order to build HyperCube Evolution on 2020 extrusion.
The missing parts shall remain the same as the ones posted by Scott.
Design is for 8mm linear rail on both X and Y.
I didn't print it yet since I'm still waiting my extrusions to arrive, so if you find any error, please let me know.
UPDATES
05-Sep: Finally all the parts have been printed and fits smoothly on 2020 profile. Original desing by Scott for Z nut holder fits fine also.
18-Sep: Idlers for 10mm rod. Modified Y endstop bracket to fit better with endstop flag. New Extruder mount to fit both min and max opto endstop. Files for 8mm Z rods.
13-Dec: Well, after a long time I finished the printer a coule of weeks ago. New pictures are available in order to check the whole remix from the original HEVO.
I added a TFT32 controller + MKS WiFi module. Also, in the same enclosure I added a couple o LED to indicate when either E0 or the Heatedbed are working. All the desings for the parts I'm using are available for download.
Also I attached two led stripes that can be turned on from MKSTFT32 and a runout filament sensor to help avoiding run out of filament during long printings.
It's fair to mention I remixed the spool holder from @bliatun (https://www.thingiverse.com/thing:2084843) and @rowokii (https://www.thingiverse.com/thing:767317).
19-Jan: Redesigned Extruder Mount. The problem I found with the original version is that the brass knurled inserts are not attached strongly enough to the plastic, so once you start tigthening the bolts, the inserts start poping out. In this new design, the inserts were placed at the back of the piece, so you can tight the screws as much as you want with out any issue.
3-May: The mods continue... Added new electronics, MKS Sbase 1.3 with its mount bracket (available for downloading). My Hevo2020 has a new Drakon Extruder by @AxMod3DPrint (https://www.thingiverse.com/thing:2172854) this was needed to get a smoother flow on the filament, without it, the extruder motor was skipping some steps, so I decided to add a geared extruder to avoid so... Also added cable chain for X and Y axles (still pending in Z). Cable chain desing by @lamturbo (https://www.thingiverse.com/thing:2823973). Also the mods for dual extrusion have began, keep you posted!
31-May: Dual extrusion! After a lot of tweaking (fighting) against SW and HW, I could finally get my HEVO 2020 Multimaterial. I added a TL-Feeder and after a lot of testing and filament wasting it now works like a charm. Also, I also added a new filament sensor that fits Drakon Extruders.
26-Jun: Tired of fighting with capacitive sensor for Z-Probe, decided to change it for mostly flawless TLTouch (BLTouch clone). Mount for this piece just fits the place for inductive sensor without needing to change any part already printed.
That's all folks...(?)