microscope adjustable stand
por 8orge
Archivos imprimibles (17)
-
stlTurning-knob-ornament1.stl
24 Ko · 2 396 descargas
-
stlBase_-_Ornament.stl
8 Ko · 2 389 descargas
-
stlTurning-knob-ornament4.stl
53 Ko · 2 360 descargas
-
stlRubber-adjuster-plate.stl
58 Ko · 2 395 descargas
-
stlScope-arm-left-ornament.stl
2 Ko · 2 385 descargas
-
stltop-ballbearing-mount-v2.stl
59 Ko · 2 402 descargas
-
stlTurning-knob-ornament3.stl
28 Ko · 2 383 descargas
-
stlScope-arm-right-ornament.stl
2 Ko · 2 365 descargas
-
stlTurning-knob-ornament6.stl
18 Ko · 2 358 descargas
-
stlTurning-knob-ornament2.stl
135 Ko · 2 364 descargas
-
stlSpindel-rod.stl
1.3 Mo · 2 449 descargas
-
stlBase_Rubber_Foot.stl
242 Ko · 2 369 descargas
-
stlTurning-knob.stl
858 Ko · 2 410 descargas
-
stlScope-arm.stl
1.9 Mo · 2 468 descargas
-
stlBase.stl
1.6 Mo · 2 431 descargas
-
stlSpindel-housing-v2.stl
371 Ko · 2 442 descargas
-
stlTurning-knob-ornament5.stl
1 Ko · 2 404 descargas
Descripción
This is a hight adjustable stand for a usb microscope .
The total hight with the optional rubber foot is 230mm .
If you found this design very helpful or otherwise wish to support me ,you can buy me a cup of coffee ( helps keeping the brain active so i can create new stuff ) ;-) ,then please
consider using this link :
What you need to assemble this is :
1 pcs m5 x 12mm hex cap head bolt
1 pcs m5 nut
2 pcs Ballbearing 8x16x5mm
The arm that holds the microscope has to be inserted first
in the middle of the tower ,it has to go in with one side first and
then the other can be pushed in ,insert then the lower ballbearing ,
then insert the rubber spacer plate in the back and then
insert the spindel rod ,remember the ballbearing in the top
piece before before pushing it in the tower :-) .
The rubber foot and the rubber spacer plate were made
from NinjaFlex , the rest is normal Pla .