microscope adjustable stand
di 8orge
File stampabili (17)
-
stlTurning-knob-ornament1.stl
24 Ko · 2 396 download
-
stlBase_-_Ornament.stl
8 Ko · 2 389 download
-
stlTurning-knob-ornament4.stl
53 Ko · 2 360 download
-
stlRubber-adjuster-plate.stl
58 Ko · 2 395 download
-
stlScope-arm-left-ornament.stl
2 Ko · 2 385 download
-
stltop-ballbearing-mount-v2.stl
59 Ko · 2 402 download
-
stlTurning-knob-ornament3.stl
28 Ko · 2 383 download
-
stlScope-arm-right-ornament.stl
2 Ko · 2 365 download
-
stlTurning-knob-ornament6.stl
18 Ko · 2 358 download
-
stlTurning-knob-ornament2.stl
135 Ko · 2 364 download
-
stlSpindel-rod.stl
1.3 Mo · 2 449 download
-
stlBase_Rubber_Foot.stl
242 Ko · 2 369 download
-
stlTurning-knob.stl
858 Ko · 2 410 download
-
stlScope-arm.stl
1.9 Mo · 2 468 download
-
stlBase.stl
1.6 Mo · 2 431 download
-
stlSpindel-housing-v2.stl
371 Ko · 2 442 download
-
stlTurning-knob-ornament5.stl
1 Ko · 2 404 download
Descrizione
This is a hight adjustable stand for a usb microscope .
The total hight with the optional rubber foot is 230mm .
If you found this design very helpful or otherwise wish to support me ,you can buy me a cup of coffee ( helps keeping the brain active so i can create new stuff ) ;-) ,then please
consider using this link :
What you need to assemble this is :
1 pcs m5 x 12mm hex cap head bolt
1 pcs m5 nut
2 pcs Ballbearing 8x16x5mm
The arm that holds the microscope has to be inserted first
in the middle of the tower ,it has to go in with one side first and
then the other can be pushed in ,insert then the lower ballbearing ,
then insert the rubber spacer plate in the back and then
insert the spindel rod ,remember the ballbearing in the top
piece before before pushing it in the tower :-) .
The rubber foot and the rubber spacer plate were made
from NinjaFlex , the rest is normal Pla .