HyperCube 3D Printer M4 Variant
di zargony
File stampabili (14)
-
stlBed_Support_v1.1_M4.stl
71 Ko · 1 477 download
-
stlSpool_Axle_Clamp_M4.stl
256 Ko · 1 475 download
-
stlXY_Idler_M4.stl
263 Ko · 1 478 download
-
stlXY_Motor_left_M4.stl
259 Ko · 1 509 download
-
stlXY_Motor_right_M4.stl
257 Ko · 1 519 download
-
stlY_Shaft_Clamp_Left_Motor_M4.stl
194 Ko · 1 481 download
-
stlY_Shaft_Clamp_M4.stl
193 Ko · 1 468 download
-
stlZ_Carriage_M4.stl
386 Ko · 1 473 download
-
stlZ_EndStop_Adjust_v1.1_M4.stl
63 Ko · 1 369 download
-
stlZ_leadscrew_support_v1.1_M4.stl
128 Ko · 1 479 download
-
stlZ_Motor_v1.1_M4.stl
258 Ko · 1 483 download
-
stlZ_nut_mount_v1.1_M4.stl
332 Ko · 1 478 download
-
stlZ_Shaft_Clamp_v1.1_M4.stl
240 Ko · 1 491 download
-
stlDual_bushing_holder_M4.stl
144 Ko · 1 386 download
Descrizione
This is a derivation of Tech2C's excellent HyperCube 3D printer. Most noticable differences to original parts are M4 holes for mounting plastic parts to I-type extrusions.
See links below for other things related to my customized HyperCube 3D printer build.
Only modified parts are contained here. For the full list of parts, refer to the original build instructions.
Modifications
M4 holes
All parts that mount to 20x20 extrusions are modified to use M4 screws instead of the default M5. Therefore it's possible to use Type I extrusions which have a 5mm slot and can take M4 nuts max.
Round holes
The rectangular slots that allow putting nuts through a part are replaced with round (elongated) holes. There's no need to have large slots if you use t-slot sliding nuts that can be inserted to the slot anywhere.
Slot guide for Z endstop adjust
The Z endstop adjust now has a small slot guide to prevent twisting.
See also
Other things related to my customized HyperCube 3D printer build:
Changelog
- 2017-05-22: Fixed z endstop slot guide orientation
- 2017-04-30: Added Dual_bushing_holder and simple 2020 corner brackets